MOT Status
ExpiredMileage
144,310 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
n\s\and o\s\front steering rack knuckle has slight play.
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central Rear Seat belt buckle missing (7.1.2 (d))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Front Drag link end ball joint has excessive play As marked (2.1.3 (b) (i))
Nearside Front Inner Suspension arm pin or bush excessively worn Track control arm bush-as marked (5.3.4 (a) (i))
Nearside Front Track rod end ball joint has excessive play As marked (2.1.3 (b) (i))
Offside Front Inner Suspension arm pin or bush excessively worn Track control arm bush-as marked (5.3.4 (a) (i))
Front Both front tyres previous evidence of catching the inner wing
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Drag link end ball joint has slight play (2.1.3 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front arm / inner bush is deteriorating (2.4.G.2)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
both front tyres have been rubbing suspension arms
engine & tyre pressure warning lights are on
Nearside Front Upper Suspension arm has excessive play in a ball joint marked in yellow (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Upper Suspension arm has excessive play in a ball joint marked in yellow (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front arm / inner bush is deteriorating (2.4.G.2)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
both front tyres have been rubbing suspension arms
engine & tyre pressure warning lights are on
Nail in offside rear tyre
Tyre pressure warning lamp illuminated.
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Stop lamp not working (1.2.1b)
Nail in offside rear tyre
Tyre pressure warning lamp illuminated.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
OSF fog lamp lens cracked
Oil leak
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
OSF fog lamp lens cracked
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Outer Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Outer Front Track rod end ball joint has excessive play (2.2.B.1f)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Inner Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Inner Front Track rod end ball joint has slight play (2.2.B.1f)
bonnet release broken
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Oil leak
brake worning lamp on
engine worning lamp on
tyre presher worning lamp on
How Reliable is the Chrysler-jeep 300?
Based on 115,793 MOT tests across 6,930 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GF06 HCV is a 2006 Chrysler-jeep 300 in Black with a 2,987cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2006 Chrysler-jeep 300 models, the average MOT pass rate is 71.5% with a typical mileage of 79,241 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler-jeep 300 fails its MOT is parking brake: efficiency below requirements, accounting for 8,438 recorded failures. If you're considering buying GF06 HCV, it's worth having these areas checked by a mechanic before committing.
The Chrysler-jeep 300 typically stays on UK roads for around 21 years. At 20 years old, this Chrysler-jeep 300 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GF06 HCV?
You can check the full history of GF06 HCV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GF06 HCV registered?
GF06 HCV is a 2006 Chrysler-jeep 300, first registered on 10 May 2006.
Is GF06 HCV safe to buy?
The MOT history for GF06 HCV shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GF06 HCV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GF06 HCV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.