MOT Status
ValidMileage
135,898 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
washer fluid tank missing lid
Horn not working (7.7 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
washer fluid tank missing lid
Nearside Rear Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement droplink (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill corroded but intact (6.1.1 (c) (i))
Nearside Rear Light cluster casing damaged , colours not affected
Nearside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge and outer edges (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Nearside Front Outer Suspension arm ball joint dust cover severely deteriorated lower arm (5.3.4 (b) (i))
Nearside Front high beam not working
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Offside Front Outer Suspension arm ball joint dust cover severely deteriorated lower arm (5.3.4 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin 3 mm (1.1.13 (a) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pad(s) wearing thin 3 mm (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Central Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Outer sill has slight corrosion
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub frame has corrosion
Windscreen wiper blade defective Held to arm via cable ties (3.4 (b) (i))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Central Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Outer sill has slight corrosion
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub frame has corrosion
Windscreen wiper blade defective Held to arm via cable ties (3.4 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Outer sill rusting
Nearside and offside rear suspension prescribed areas rusting
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear most (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Outer sill rusting
Nearside and offside rear suspension prescribed areas rusting
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear most (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge Also heavy cracking in tread (5.2.3 (e))
Items removed from driver's view prior to test ()
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicles internal headlight adjuster altered to recheck lights ()
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicles internal headlight adjuster altered to recheck lights ()
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Items removed from driver's view prior to test
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Items removed from driver's view prior to test
Offside Rear Registration plate lamp not working (1.1.C.1d)
Items removed from driver's view prior to test
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
front wiper split
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GF06 MLK is a 2006 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying GF06 MLK, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GF06 MLK?
You can check the full history of GF06 MLK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GF06 MLK registered?
GF06 MLK is a 2006 Toyota Aygo, first registered on 30 April 2006.
Is GF06 MLK safe to buy?
The MOT history for GF06 MLK shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GF06 MLK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GF06 MLK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.