MOT Status
ExpiredMileage
93,211 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill/floor pan (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill/floor pan (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced corroded around fuel filler flap (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill corroded but not holed (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner arch corroded but not holed (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill corroded but not holed (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill corroded in many places but not holed (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced both under and outer sill (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Road wheel badly distorted (5.2.2 (c) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Road wheel badly distorted (5.2.2 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced both under and outer sill (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
condensation to offside front headlight and slightly loose
offside front ball joint dust cover slightly split
slight corrosion offside rear outer sill
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
condensation to offside front headlight and slightly loose
offside front ball joint dust cover slightly split
slight corrosion offside rear outer sill
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Front coil spring broken (2.4.C.1a) DANGEROUS
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Spare tyre defective ()
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Spare tyre defective ()
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GF08 OFA is a 2008 Ford Ka in Purple with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying GF08 OFA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GF08 OFA?
You can check the full history of GF08 OFA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GF08 OFA registered?
GF08 OFA is a 2008 Ford Ka, first registered on 31 March 2008.
Is GF08 OFA safe to buy?
The MOT history for GF08 OFA shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GF08 OFA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GF08 OFA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.