2014 Qingqi Qm

Drive chain worn to excess (6.1.7 (c) (i))

Rear Brake disc significantly and obviously worn very badly scored (1.1.14 (a) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust has a minor leak of exhaust gases silencer slightly loose (6.1.2 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

rear left hand side indicator lens missing but works ok

Clutch lever bent (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Lower Rear suspension bush has slight free play shock absorber (2.4.A2a(i))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Wheel spoke excessively loose Most spokes loose. (4.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicator insecure l/h and r/h rear indicators insecure. (1.5.3b)

Rear Footrest missing l/h and r/h. (6.2.1a)

Rear Rear suspension bush has excessive free play Swingarm pivot bushes/sleeves. (2.4.A2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel spoke excessively loose Most spokes loose. (4.2.1b)

Rear reflector on motorcycle insecure (1.4.2c)

Steering lock stop missing (2.1.3)

Exhaust mounting deteriorated. (7.1.1.c)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Steering movement slightly 'notchy' (2.2.1b)