2002 Mazda 6

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Anti-roll bar linkage fractured (2.4.G.1)

Offside Rear Lower Tie bar/rod damaged and seriously weakened (2.4.G.1)

Offside Rear Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Rear registration plate character(s) likely to be misread (6.3.4b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b) DANGEROUS

Rear Lower Suspension arm corroded but not seriously weakened both (2.4.G.1)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

rear wheelarches corroded

Oil leak ()

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

engine covers and undertrays fitted

exhaust heat shield deteriorated

nearside and offside rear wheel arches corroded

slight corrosion on nearside and offside rear brake discs

some corrosion around rear suspension parts

Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

engine covers and undertrays fitted

exhaust heat shield deteriorated

nearside and offside rear wheel arches corroded

plasic covers fitted on both outer body sills not allowing inspection underneath

slight corrosion on nearside and offside rear brake discs

some corrosion around rear suspension parts

some corrosion on front to rear inner sills

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

both rear wheel arches corroded

offside front wiper split but clearing the windsreen

plasic trims fitted to both outer body sills not allowing inspection underneath

some corrosion around front and rear suspension parts

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust system not adequately supported (7.1.1)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

both rear wheel arches corroded

offside front wiper split but clearing the windsreen

plasic trims fitted to both outer body sills not allowing inspection underneath

some corrosion around front and rear suspension parts

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

bracket deteriorated on rear exhaust but still supported

covers on outer siils not allowing full inspection

nearside and offside rear inner and outer sills slight corrosion

nearside rear tyre has a cut in sidewall but not to cords

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

bracket deteriorated on rear exhaust but still supported

covers on outer siils not allowing full inspection

nearside and offside rear inner and outer sills slight corrosion

nearside rear tyre has a cut in sidewall but not to cords

Engine covers fitted obscuring some components in the engine bay

Exhaust tail pipe mounting corroded away

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Front Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Registration plate lamp not working (1.1.5c)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Headlamp aim too low (1.8)

SUSSPECT A.B.S. WIRE RUBBING ON REAR NEAR SIDE TYRE.?