MOT Status
ExpiredMileage
129,146 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt front ball joint (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Nearside Rear Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Outer Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
both front inner sills badly corroded
both rear inner sills badly corroded
rear exhaust joints badly corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Front Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear wheel bearing rough when rotated (2.6.1)
o/s front wiper in poor condition
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Suspension joint offside lower dust cover split/missing
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GF52 GUD is a 2002 Mazda 6 in Silver with a 2,261cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 75%.
Across all 2002 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 78,488 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying GF52 GUD, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 24 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GF52 GUD?
You can check the full history of GF52 GUD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GF52 GUD registered?
GF52 GUD is a 2002 Mazda 6, first registered on 29 October 2002.
Is GF52 GUD safe to buy?
The MOT history for GF52 GUD shows 16 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GF52 GUD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GF52 GUD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.