2007 BMW 5 Series

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin n.s & o.s (1.1.13 (a) (ii))

presented in very wet condition

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive Rear diff (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive 3 subframe mounting points (5.3.6 (a) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive 3 subframe mounting points (5.3.6 (a) (i))

Nearside Position lamp not working (4.2.1 (a))

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front registration plate character(s) laid out in an incorrect format (6.3.4f)

Rear registration plate character(s) laid out in an incorrect format (6.3.4f)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

pad warning light on

Engine covers fitted obscuring some components in the engine bay

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Road wheel with a slightly distorted bead rim (4.2.A.1a)

Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Road wheel with a slightly distorted bead rim (4.2.A.1a)