2004 Honda Civic

Brake pipe corroded, covered in grease or other material all round (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material all round (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both side (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material all round (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both side (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Driver's airbag missing (7.1.5 (a))

Front Position lamp not working Both Side (4.2.1 (a) (ii))

Horn not working (7.7 (a))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Sill And Wheel Arch (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced front and rear (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength sill and wheel arch (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Driver's airbag missing (7.1.5 (a))

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Nearside Obligatory mirror insecure (3.3 (b) (ii))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and wheel arch (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Brake pipe excessively corroded chassis leg (1.1.11 (c))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill+floor (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and wheel arch (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pedal wearing smooth (1.1.2 (c))

Coil spring corroded all (5.3.1 (b) (i))

Coolant leak radiator hose ()

Nearside Front bumper loose

Nearside Front seat does not allow access to the rear seats

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

aftermarket manifold fitted

fuel tank exhaust heat shield loose

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

exhaust corroded slight blow

underside of vehicle panels corroding

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

exhaust corroded slight blow

underside of vehicle panels corroding

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii))

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii))

Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer not working (3.5 (a))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

All 4 tyre treads wearing low

Off side head lamp beam aim poor

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)