2005 Fiat Panda

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked in yellow (6.2.2 (d) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Both headlamp lenses deteriorated and beam images poor

Corrosion to rear suspension components

Floors corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil close to excessive fluid leak (5.3.2 (b))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Weld repairs covered in under seal

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Both headlamp lenses deteriorated and beam images poor

Corrosion to rear suspension components

Floors corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil close to excessive fluid leak (5.3.2 (b))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear outer sils rusty,nearside and offside

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

wiper blades starting to age

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i))

wiper blades starting to age

Rear Exhaust has a minor leak of exhaust gases backbox (7.1.2)

front exhaust support corroded through

Nearside Front Coil spring not correctly located (2.4.C.2)

Rear Exhaust has a minor leak of exhaust gases backbox (7.1.2)

front exhaust support corroded through

rear exhaust slightly deteriated

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Side repeater adversely affected by the operation of another lamp (1.4.A.2h)

Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)

rear exhaust slightly deteriated

n/s/r tyre inner and outer side walls deteriorated

rear exhaust box deteriorated

Offside Front Coil spring mounting loose (2.4.C.3a)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

n/s/r tyre inner and outer side walls deteriorated

rear exhaust box deteriorated

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

windscreen washers need adjusting

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Brake pad(s) wearing thin (3.5.1g)