MOT Status
ExpiredMileage
75,477 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Child seat fitted not allowing full inspection of adult belt
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Offside Rear Road wheel slightly damaged (4.2.A.1a)
both front lower arm rear suspenion bushes in poor condition
wiper blades in poor condition
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Headlamp aim too high (1.8)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Offside Rear Road wheel slightly damaged (4.2.A.1a)
both front lower arm rear suspenion bushes in poor condition
wiper blades in poor condition
Child seat fitted not allowing full inspection of adult belt
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
Nail in offside rear tyre
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Speedometer cannot be illuminated. (6.7.3)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
n/s/f inner wheel rim distorted. n/s/f wheel arch/bumper loose.
Offside Stop lamp not working (1.2.1b)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
n/s/f inner wheel rim distorted. n/s/f wheel arch/bumper loose.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GJ06 BZC is a 2006 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying GJ06 BZC, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GJ06 BZC?
You can check the full history of GJ06 BZC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GJ06 BZC registered?
GJ06 BZC is a 2006 Ford Ka, first registered on 8 April 2006.
Is GJ06 BZC safe to buy?
The MOT history for GJ06 BZC shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GJ06 BZC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GJ06 BZC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.