2010 Peugeot 107

Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule nearside and offside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule nearside and offside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective missing (6.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material up to flex (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits see print out (8.2.1.2 (a))

Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective missing (6.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material up to flex (1.1.11 (c))

Exhaust system insecure (6.1.2 (a))

Offside Brake pipe excessively corroded front to rear at rear (1.1.11 (c))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords split to cords on inner side wall (5.2.3 (d) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Brake pad(s) wearing thin on limit now (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

clutch bites very high

floor area rusty

handbrake comes up high

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge on 3 mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge on 2 mm (5.2.3 (e))

Nearside Rear Tyre worn close to the legal limit worn on outer edge 155/65/14 (4.1.E.1)

both rear tyres perishing in tread

wiper slightly smearing

Both front tires worn on inside edge

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)