2011 Volkswagen Polo

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Oil level over maximum on dipstick

Front Exhaust has a minor leak of exhaust gases through the flexy (6.1.2 (a))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Outer Cv boot greasy appearance

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Outer CV boot leaking grease

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer CV boot leaking grease

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

slight rust of the rear silncer

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

slight rust of the rear silncer

Nearside Headlamp aim too low ***ADJUSTER NOT WORKING*** (4.1.2 (a))

Offside Headlamp aim too low ***ADJUSTER NOT WORKING*** (4.1.2 (a))

front brake discs and pads

nail in nearside rear tyre

offside rear tyre in tread perished

rear exhaust box rusty

fuel filter damp

nearside and offside front shockers slight leak

nearside and offside front tyres perished in tread

undertrays fitted

Nearside & Offside front shockers slight leak

Nearside & Offside front tyre inner edges worn

Rear exhaust box rusty

Sill covers fitted

Undertrays fitted

nearside front shocker slight leak

offside and nearside rear tyres worn on inner edges

undertrays fitted

Engine covers fitted obscuring some components in the engine bay

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

sill covers fitted

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Under-trays fitted obscuring some underside components

emissions test not printed too clean and maximum revs 3000

sill covers fitted