2014 Peugeot 208

Bonnet primary retaining device ineffective (3.1 (c))

Front Wheel bearing rough when rotated both (5.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Seat belt anchorage prescribed area strength or continuity significantly reduced both - outer sill (7.1.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened and rear (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust system insecure (6.1.2 (a))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened and rear (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside. (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside. (5.3.6 (a) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Brake disc significantly and obviously worn inner face. (1.1.14 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen washer not working (3.5 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside. (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside. (5.3.6 (a) (i))

Steering system slightly rough due to both front suspension top mounts worn. (2.1.1 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

both front top mount bearings slightly rough when rotated

exhaust back box hanger broken

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

both front top mount bearings slightly rough when rotated

exhaust back box hanger broken

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

inner surfaces of front brake discs corroded

Front Exhaust mounting defective front pipe bracket broken (6.1.2 (a))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Brakes imbalanced across an axle (3.7.B.5b)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Exhaust system not adequately supported (7.1.1)