2008 Toyota Aygo

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust has a major leak of exhaust gases Rear section (6.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Brake disc significantly and obviously worn Both sides front (1.1.14 (a) (i))

Front Bumper insecure (6.1.4 (a) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Headlamp aim projected beam image is obviously incorrect Both sides (4.1.2 (c))

Nearside Front Macpherson strut pin or bush excessively worn Top mount (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Bumper damaged and likely to cause injury when grazed or contacted Sharp edge (6.1.4 (a) (i))

Offside Front Macpherson strut pin or bush excessively worn Top mount (5.3.4 (a) (i))

Offside Obligatory mirror insecure Mirror cover damaged has sharp edge (3.3 (b) (ii))

Offside Rear Bumper insecure (6.1.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension arm pin or bush likely to become detached Lower rear pin or bush (5.3.4 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Driver's view Items removed from driver's view prior to test Phone holder (3.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Rear to front (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Rear to front (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive Engine oil leak (8.4.1 (a) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Suspension component corroded but not seriously weakened Rear axle corroded (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

exhaust middel part and ast part have not secure

Nearside Front Suspension arm pin or bush excessively worn Lower arm rear bush split (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Lower arm rear bush split (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Lipped (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin Getting low (1.1.13 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Sill slight hole in it but not gone throw

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective corroded and detached (6.1.2 (a))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside mirror cover slightly damaged

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Emissions not tested (7.3.A.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' stuff on mirror (8.3.1e)

Registration plate lamp not working (1.1.C.1d)

Front brake pads hard to see.