2009 Alfa Romeo Mito

Front Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Offside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Coil spring corroded both rear (5.3.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Headlamp aim too far to the right (4.1.2 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear parking brake low effort

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Horn not working (7.7 (a) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule all rear (1.1.12 (f) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule all rear (1.1.12 (f) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Tyre worn close to the legal limit both (4.1.E.1)

all tyres perishing

rear exhaust box corroded on outer skin

Offside Front coil spring broken (2.4.C.1a)

rear exhaust silencer corroded

some corrosion to rear exhaust box

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

rear exhaust box split but not leaking

Brakes imbalanced across an axle (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

rear exhaust box split but not leaking