2010 Fiat Punto Evo

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Sub-frame corroded but not seriously weakened front and back (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Sub-frame corroded but not seriously weakened front and back (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened both front arms (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases front and rear (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Manufactures engine and body covers fitted restricting full inspection

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear fog lamp insecure (4.5.1 (c) (i))

Suspension arm corroded but not seriously weakened both fronts (5.3.3 (b) (i))

Suspension component pin or bush slightly worn both main axle bushes (5.3.4 (a) (i))

bonnet secondary release lever very stiff to open

boot release button only works intermittently

Exhaust has a minor leak of exhaust gases front and rear (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Manufactures engine and body covers fitted restricting full inspection

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear fog lamp insecure (4.5.1 (c) (i))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Suspension arm corroded but not seriously weakened both fronts (5.3.3 (b) (i))

Suspension component pin or bush slightly worn both main axle bushes (5.3.4 (a) (i))

bonnet secondary release lever very stiff to open

boot release button only works intermittently

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Emissions not tested (8.2.1.2 (d))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Exhaust system insecure (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Headlamp aim too low (4.1.2 (a))

Rear Tyre worn close to legal limit/worn on edge Both rear tyres (5.2.3 (e))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)