2002 Suzuki GS500

Brake disc worn, but not excessively front disc bobbins corroded (1.1.14 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Direction indicator not working front right hand (4.4.1 (a) (ii))

Brake disc worn, but not excessively front disc bobbins corroded (1.1.14 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Shock absorber has a light misting of oil both fork legs (5.3.2 (b))

Suspension arm pin or bush excessively worn rear lower suspension arm to frame bearing (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Shock absorber has a light misting of oil both fork legs (5.3.2 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Slight cracking in tread of front tyre.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Brake lever insecure (1.1.2 (e) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Nail in front tyre

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Valve stem slightly damaged cracking (5.2.3 (j))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate insecure (0.1 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Throttle operating incorrectly (6.2.7 (a) (i))

rear side panels insecure

nail in front tyre

Front wheel bearings are slightly rough (2.3.5b)

Clutch lever bent (6.2.1g)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings are excessively rough (2.3.5b)

Clutch lever bent (6.2.1g)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre tread not clearly visible (4.1.3(i))

Front mudguard insecure (2.3.7)

Headlamp aim too high (1.6)

Nearside bar grip damaged

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front suspension assembly component loose (2.3.1)

Headlamp aim beam image kick up to the offside (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain excessively tight (6.2.1d) DANGEROUS

Nearside bar grip damaged