2006 Seat Toledo

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Headlamp insecure Broken (4.1.1 (c))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Tyre fitted with 'inside' sidewall on the outside, & sidewall is VERY heavily damaged around whole circumference.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear coil springs corroded

Tailgate mechanisms appears slightly faulty

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect Bulb insecure (4.1.2 (c))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect Bulb insecure (4.1.2 (c))

Offside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear coil springs corroded

Tailgate mechanisms appears slightly faulty

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii))

Nearside Rear Outer Nail in tyre edge ()

Offside Rear tyre flat

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit inner edge wear (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Engine appears to have a lot of movement within mountings.

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)