2003 Hyundai Getz

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

both front wishbone rear bushes have slight play

power steering belt slightly slack

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

both front wishbone rear bushes have slight play

Oil leak

temporary repair to rear bumper

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Driver's door does not latch securely closed (6.2.B.1a) DANGEROUS

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

attention to rear bumber security taped

boot catch sticking

both outer cv boots cracking

clutch antislip pad missing

corrosion on offside front brake pipe

movement in rear seat back rests

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pipe excessively corroded (3.6.B.2c)

Rear registration plate deteriorated (6.3.1d)

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Power steering pipe(s) or hose(s) excessively corroded (2.3.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

exhaust back box and join badly corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brake application uneven (3.7.B.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brakes uneven

rear brakes uneven

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust mounting missing (7.1.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)