2003 Chrysler Pt Cruiser

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe slightly damaged (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

cracking in side wall of offside rear tyre

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Headlamp deteriorated but light output not reduced Both sides. (1.7.5a)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Rear fog lamp switch missing (1.3.1a)

Front Headlamp deteriorated but light output not reduced Both sides. (1.7.5a)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Exhaust system not adequately supported mounting broken (7.1.1)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

rear exhaust bracket very rusty

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in offside front tyre

o/s/f and n/s/f tyres tread perished

Brake servo vacuum pipe lightly rubbing (3.6.C.1b)

Brake vacuum pipe slightly chafed (3.6.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)