2008 Peugeot 107

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

front and raer bumpers slightly loose

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

front and raer bumpers slightly loose

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides starting to perish (5.3.4 (a) (i))

Front headlights lens fading both sides

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Upper Bumper loose

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides starting to perish (5.3.4 (a) (i))

Front headlights lens fading both sides

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Upper Bumper loose

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Nearside Rear Bumper loose

Front headlights lens both sides fading

Nearside Rear Inner Road wheel slightly distorted rim (5.2.2 (c) (i))

top up oil in engine

Front headlights lens both sides fading

Nearside Rear Bumper loose

Nearside Rear Inner Road wheel slightly distorted rim (5.2.2 (c) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both sides (4.7.1 (b) (ii))

top up oil in engine

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front headlights lens fading both sides

Nearside Rear Bumper loose

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Inner Road wheel slightly distorted rim (5.2.2 (c) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure side walls and in treads (5.2.3 (d) (ii)) DANGEROUS

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front headlights lens fading both sides

Nearside Rear Bumper loose

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Inner Road wheel slightly distorted rim (5.2.2 (c) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Service brake excessively fluctuating both sides (1.2.1 (e))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Tyre obviously under inflated (5.2.3 (l))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Upper Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

both front tyre low inner edges

front brake pads on limit

Front position lamp(s) not working (1.1.A.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

mil light on

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)