2010 Toyota Prius

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Direction indicator lens defective which has no effect on emitted light Lens damaged but no sharp edges (4.4.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Shock absorbers light misting of oil or has limited damping effect both side (5.3.2 (b))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Nearside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Shock absorbers light misting of oil or has limited damping effect both side (5.3.2 (b))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Nearside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Outer Tyre has a tear, caused by separation or partial failure of its structure both side (5.2.3 (d) (ii)) DANGEROUS

Front Position lamp not working both (4.2.1 (a))

Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

all four tyres perished