2011 Mazda 6

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement control arm bushes (5.3.4 (a) (i))

Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement control arm bushes (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicles internal headlight adjuster altered to recheck lights ()

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement control arm bushes (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement control arm bushes (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive timing chain area (8.4.1 (a) (i))

Oil leak, but not excessive turbo (8.4.1 (a) (i))

Emissions not tested producing excessive black smoke (8.2.2.2 (e))

Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Oil leak, but not excessive timing chain area (8.4.1 (a) (i))

Oil leak, but not excessive turbo (8.4.1 (a) (i))

Offside Rear tyre stepping on inner edge

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear tyre stepping on inner edge