2020 Sinnis ZS 125-86 Terrain

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Lower Motorcycle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Headlamp aim too low (4.1.2 (a))

Front Upper Engine mounting/bracket missing (6.1.8 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Lower Motorcycle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Handlebar deformed but serviceable (2.2.1 (c) (i))

Luggage rack loose

Motorcycle structure is deformed but structural rigidity is not significantly reduced Front lower (engine bar attachment) (6.1.1 (a) (i))

Rear Nail in tyre ()

Rear tyre underinflated

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

exhaust mounting bracket bolt missing

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp aim unable to be tested (4.1.2 (b))

Horn not working (7.7 (a))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Engine mounting/bracket missing (6.1.8 (a) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

exhaust mounting bracket bolt missing