2002 Mazda 6

Nearside Front Suspension arm ball joint excessively worn front arm (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) wearing thin (3.5.1g)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

fuel tank breather pipe slight corrosion

Nearside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Exhaust system not adequately supported (7.1.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

fuel tank breather pipe slight corrosion

nsf wiper blade insecure

number plates fade

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

number plates fade

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nearside rear tyre perished and cracked 2/3mm

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

nearside rear tyre perished and cracked 2/3mm

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front brake disc slightly scored (3.5.1h)

Nearside Front position lamp(s) not working (1.1.A.3b)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front brake disc slightly scored (3.5.1h)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)