2002 Mazda 6

Headlamp levelling device inoperative (4.1.5 (a))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn brake reaction bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Lower Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Headlamp levelling device inoperative Both (4.1.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Outer Tyre slightly damaged/cracking or perishing Sidewall (5.2.3 (d) (ii))

Nearside Rear Nail in tyre ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Steering column top bearing slightly worn (2.2.2 (b))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced cill (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced cill (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Gearbox mounting defective centre lower dog bone mounting ()

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Rear reflector missing (4.8.2 (a) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

General surface corrosion to brake and suspension components

General surface corrosion to brake and suspension components

Nearside Registration plate lamp not working (1.1.C.1d)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Brake pad(s) wearing thin (3.5.1g)

both front tyres on 3mm

Items removed from driver's view prior to test

Items removed from driver's view prior to test

damage to offside rear tyre outer side wall

Nearside Headlamp aim too high (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Rear Exhaust system not adequately supported (7.1.1)

Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Rear registration plate deteriorated (6.3.1d)