MOT Status
ExpiredMileage
110,876 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Direction indicator adversely affected by the operation of another lamp o/s/r and n/s/r (4.4.3 (b))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Brake disc worn, but not excessively o/s/f and n/s/f (1.1.14 (a) (i))
Shock absorbers has a slightly worn bush o/s/f and n/s/f (5.3.2 (c))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Hazard warning lamps inoperative (4.4.1 (e))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
front exhaust flexi outer case corroded
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
front exhaust flexi outer case corroded
both front tyres slightly perished second had fitted
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front tyre perished
tracking needs adjusting
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
rear exhaust deteriorated
Back box exhaust outer skin is corroded
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Headlamp aim too low (1.8)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Back box exhaust outer skin is corroded
Offside front brake slighty binding.
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Child seat fitted not allowing full inspection of adult belt
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar linkage severely distorted (2.4.G.1)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GL08 BSZ is a 2008 Fiat Panda in Red with a 1,108cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2008 Fiat Panda models, the average MOT pass rate is 72.8% with a typical mileage of 50,567 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying GL08 BSZ, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 18 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GL08 BSZ?
You can check the full history of GL08 BSZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GL08 BSZ registered?
GL08 BSZ is a 2008 Fiat Panda, first registered on 13 May 2008.
Is GL08 BSZ safe to buy?
The MOT history for GL08 BSZ shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GL08 BSZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GL08 BSZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.