2004 Kia Sorento

Fluid leak harmful to the environment or a risk to other road users (8.4.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside inner sill corroded but not with 30cm of a body mounting

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear suspension components corroded

Sill covers fitted to both outer sills

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill at rear (6.1.B.2)

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside inner sill corroded but not with 30cm of a body mounting

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear suspension components corroded

Sill covers fitted to both outer sills

Brake hose has slight corrosion to ferrules Both front (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Fuel Pipe/s corroded ()

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Outer sill covers fitted

Rear chassis and suspension components corroded

Nearside Rear Suspension component mounting prescribed area is excessively corroded Tie bar mounting bracket on axle (2.4.A.3)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Fuel Pipe/s corroded ()

Brake hose has slight corrosion to ferrules Both front (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Outer sill covers fitted

Rear chassis and suspension components corroded

Windscreen washer provides insufficient washer liquid (8.2.3)

nearside front inner sill is corroded

outer sills unable to check because of plasic moulding

surface corrosion underside of vehicle

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

All brake pipes covered in thick grease

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

Centre Rear Brake pivot has restricted free movement (3.5.1k)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake binding (3.7.B.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)