2005 Fiat Stilo

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Engine check light on

Front exhaust flexable section deteriorated

Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside front tyre very worn on inner edge and worn close to wear bar indicators

Offside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside front tyre very worn on inner edge

Offside rear handbrake cable outer cover worn at beam support bracket

Oil leak

Centre Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Engine check light on

Front exhaust flexable section deteriorated

Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside front tyre very worn on inner edge and worn close to wear bar indicators

Offside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside front tyre very worn on inner edge

Offside rear handbrake cable outer cover worn at beam support bracket

Offside rear tyre very worn on outer edge

Oil leak

Child seat fitted not allowing full inspection of adult belt

Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nail in nearside rear tyre

Nail in offside rear tyre

both rear shocker top mouting bush's deteriorating / splitting

engine light on dash

front wipers deteriorating / slow to clear screen

play in both rear axle bush's

Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front coil spring incomplete (2.4.C.1a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate insecure (6.3.1b)

Nearside Front Headlamp aim too low (1.8)

Nearside front brake grabbing severely (3.7.A.2b)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)