MOT Status
ExpiredMileage
112,906 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Inner Tyre worn close to legal limit/worn on edge edges worn both front X2 (5.2.3 (e))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
surface corrosion underside
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed almost entire sill (7.1.1 (a) (i))
Front Inner Tyre worn close to legal limit/worn on edge edges worn both front X2 (5.2.3 (e))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
surface corrosion underside
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill/floor (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor seat mount x 2 holes (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill/floor (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))
corrosion appearing too underside
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)
Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
corrosion appearing too underside
Suggest check front pads
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Headlamp not working on dipped beam (1.7.5a)
Registration plate lamp not working (1.1.C.1d)
Suggest check front pads
Exhaust tailpipe corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake fluid warning lamp illuminated (3.6.G.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust tailpipe corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Front registration plate deteriorated (6.3.1d)
Rear registration plate deteriorated (6.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Play in steering rack inner joint(s)
front wiper blades smeering
slight deterioration front number plate
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
cracks sidewalls both rear tyres
slight deterioration front number plate
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GL55 RUJ is a 2006 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying GL55 RUJ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GL55 RUJ?
You can check the full history of GL55 RUJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GL55 RUJ registered?
GL55 RUJ is a 2006 Ford Ka, first registered on 31 January 2006.
Is GL55 RUJ safe to buy?
The MOT history for GL55 RUJ shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GL55 RUJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GL55 RUJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.