2006 Mazda RX-8

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust noisy (7.1.4)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Nearside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Nearside Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Offside Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Headlamp cleaning device inoperative (1.7.2)

Offside Front Body has a sharp edge caused by damage indicator lens (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Exhaust noisy (7.1.4)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Nearside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Nearside Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Offside Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

front discs slightly corroded

rear discs slightly corroded

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

front discs slightly corroded

rear discs slightly corroded

slight corrosion to front discs

slight corrosion to rear discs

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

near side rear tyre wall inner perishing

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

near side rear tyre wall inner perishing

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Front Brake pad(s) wearing thin (3.5.1g)