2014 Peugeot 208

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes slightly deteriorated (5.3.4 (a) (i))

Rear Inner Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Lower Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear bump stops missing

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes slightly deteriorated (5.3.4 (a) (i))

Rear Inner Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Lower Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear bump stops missing

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes deteriorated slightly (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Inner Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear bump stops missing at time of test

rear washers not working

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Exhaust noisy central heat shield insecure (8.1.1 (a))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes deteriorated slightly (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Inner Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear bump stops missing at time of test

rear washers not working

Rear Inner Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear suspension rubber bump stops missing at time of test

Front Exhaust system insecure (6.1.2 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing 2mm (5.2.3 (d) (ii))

Rear Inner Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear suspension rubber bump stops missing at time of test

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust silencer insecure (8.1.1 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front tyre sidewall damaged