2003 Honda CB250

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Nearside Rear Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing slightly stiff or notchy notchy centre -close to limit (2.2.2 (f) (i))

front tyre perished slightly

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Headlamp aim too low (4.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Headlamp aim too low (4.1.2 (a))

Rear Stop lamp not working Front brake application (4.3.1 (a) (ii))

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Steering headbearing has excessive free play (2.2.2)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Floor brake test indicates a binding brake (3.3.C2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nail in rear tyre

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Nail in rear tyre

both front fork legs are pitted & corroded

front brake pads wearing low

Offside Rear Footrest missing (6.2.1a)

both front fork legs are pitted & corroded

front brake pads wearing low

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Direction indicators not working (1.5.1c)

Drive chain excessively loose (6.2.1d)