2006 Piaggio Vespa

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Wheel alignment slightly misaligned (2.4 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Lower Slight oil leak

Rear Position lamp damaged but function not impaired (4.2.1 (b))

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Wheel alignment slightly misaligned (2.4 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Lower Slight oil leak

Rear Position lamp damaged but function not impaired (4.2.1 (b))

Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Central Front Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Central Lower Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Stop lamp damaged but function not impaired (4.3.1 (b) (ii))

Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Front Suspension has slightly inadequate damping effect

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Fuel cap sealing washer deteriorated (7.2.2c)

Riders seat insecure (6.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) is excessively distorted (3.2.A1m)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fuel cap sealing washer missing (7.2.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate faded (6.3.1d)

Riders seat insecure (6.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fuel cap sealing washer missing (7.2.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Riders seat insecure (6.2.1a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Fuel cap sealing washer missing (7.2.2c)