2001 Suzuki GSF600

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Riders footrest slightly bent

Oil cooler hoses have slight corrosion on Ferrules

Pass light not working

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Dust Covers on Front Shocks Deteriorated

Head lamp aim adjusted

OSR Foot Peg Requires Attention?

Oil Cooler Pipe Ferrule Cracking ?

Rear suspension bush has slight free play rear linkage (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1b)

Rear suspension bush has slight free play rear linkage (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1b)

Stop lamp does not illuminate immediately a brake applies front switch (1.3.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Horn sounds harsh or grating (1.7.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))