2012 Ktm 125

Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Drive chain excessively loose (6.1.7 (c) (i))

Exhaust system insecure (6.1.2 (a))

Front Brake excessively binding (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake lagging in operation (1.2.1 (d))

Nearside Front Footrest insecure incorrect footrest (6.2.12 (a))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Footrest missing rear footpegs both missing (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Stop lamp not working Front brake light switch not working (4.3.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel alignment slightly misaligned (2.4 (a))

Exhaust noisy (7.1.2)

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride side stand spring incorrectly fitted which catches the gear lever and knocks it into gear (6.2.1h)

Rear Roller brake test indicates a binding brake (3.3.A1a)