2003 Toyota Yaris

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Inner Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Outer Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Outer Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive and offside rear inner sill areas (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing on border (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Worn outer edge (5.2.3 (e))

Nearside Rear Nail in tyre ()

Slight general corrosion rear

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area (7.1.1 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement All (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Worn outer edge (5.2.3 (e))

Nearside Rear Nail in tyre ()

Slight general corrosion rear

Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Offside Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Front Headlamp aim too low (1.8)

Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Offside Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Long travel on hand brake

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Rear axle has a brake imbalance of 25%

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

o/s/r tyre slightly worn on inner edge

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Stop lamp not working (1.2.1b)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)