MOT Status
ExpiredMileage
89,317 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened areas corroded other areas heavily undersealed (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened areas corroded other areas heavily undersealed (5.3.3 (b) (i))
repairs to underbody heavily undersealed
underside of vehicle has corrosion to various parts of chassis/body. not excessive.
Front Lower Suspension arm pin or bush excessively worn Both n/s/f and o/s/f (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
underneath vehicle has been covered in a black substance
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
exhaust corroded
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
exhaust corroded
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Central Body has slight corrosion (6.1.B.2)
Nearside Rear Inner Body has slight corrosion (6.1.B.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Inner Body has slight corrosion (6.1.B.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Central Body has slight corrosion (6.1.B.2)
Nearside Rear Inner Body has slight corrosion (6.1.B.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Inner Body has slight corrosion (6.1.B.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Front Tyre worn close to the legal limit (4.1.E.2b)
Offside Front Tyre worn close to the legal limit (4.1.E.2b)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.2b)
Offside Front Tyre worn close to the legal limit (4.1.E.2b)
front discs corroded
front wiper split
n/s/r tyre cracking in tread
o/s/r tyre cracking in tread
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GP06 LTX is a 2006 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying GP06 LTX, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GP06 LTX?
You can check the full history of GP06 LTX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GP06 LTX registered?
GP06 LTX is a 2006 Toyota Aygo, first registered on 25 May 2006.
Is GP06 LTX safe to buy?
The MOT history for GP06 LTX shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GP06 LTX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GP06 LTX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.