MOT Status
ValidMileage
119,048 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Inner sills Both side (5.3.6 (a) (i))
Front Sub-frame corroded and seriously weakened Both side (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Inner sills Both side (5.3.6 (a) (i))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Registration plate inscription illegible (0.1 (b))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Body panel insecure (6.2.1 (a) (i))
Nearside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))
Offside Front Drive shaft joint constant velocity boot missing (6.1.7 (g) (ii))
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Emissions unable to be completed excessive exhaust leak holes in back box (8.2.1.2 (d))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))
exhaust heat shields are loose
front subframe corroded
inner sills are corroded from front to rear on both sides
rear axle is corroded
rear shocks are corroded
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))
exhaust heat shields are loose
front subframe corroded
inner sills are corroded from front to rear on both sides
rear axle is corroded
rear shocks are corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Items removed from driver's view prior to test
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear outer sill corroded at rear
Offside Rear outer sill corroded at rear
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
engine management light on dash
exhaust deteriorated
exhaust hanger broken but supported by another
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside rear brake binding (3.7.B.1)
front subframe corroded
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Brake pad(s) wearing thin (3.5.1g)
front discs worn o/s n/s
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
front discs worn o/s n/s
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GP06 LXH is a 2006 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying GP06 LXH, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GP06 LXH?
You can check the full history of GP06 LXH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GP06 LXH registered?
GP06 LXH is a 2006 Toyota Aygo, first registered on 25 May 2006.
Is GP06 LXH safe to buy?
The MOT history for GP06 LXH shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GP06 LXH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GP06 LXH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.