MOT Status
ValidMileage
143,001 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Floor pan and suspension components corroded
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in sill (6.1.1 (c) (i))
Floor pan and suspension components corroded
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both arms (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material greased (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Rear Coil spring corroded Both (5.3.1 (b) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Rear Coil spring corroded Both (5.3.1 (b) (i))
Front Anti-roll bar corroded but not seriously weakened both (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded both (5.3.1 (b) (i))
Front Registration plate insecure (0.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Anti-roll bar corroded but not seriously weakened both (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded both (5.3.1 (b) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge on 3-4mm (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge on 3-4mm (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a))
Rear Registration plate inscription illegible letter missing (0.1 (b))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Items removed from driver's view prior to test
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases back box (7.1.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Items removed from driver's view prior to test
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too low (1.8)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Electronic power steering warning lamp indicates a failure in the system (2.3.8)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GP06 NBJ is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying GP06 NBJ, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GP06 NBJ?
You can check the full history of GP06 NBJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GP06 NBJ registered?
GP06 NBJ is a 2006 Toyota Aygo, first registered on 25 May 2006.
Is GP06 NBJ safe to buy?
The MOT history for GP06 NBJ shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GP06 NBJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GP06 NBJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.