MOT Status
ExpiredMileage
41,575 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Nearside Front play in strut top mount
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill end (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
chassis corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive front most subframe mount (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive rear most mount (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Shock absorbers has a slightly worn bush Macpherson strut: attachment bracket / mounting has lift (5.3.2 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced quarter panel around fuel filler (6.1.1 (c) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill end (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive rear most mount (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (view from inside boot) (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill end (5.3.6 (a) (i))
Rear exhaust mount snapped off
Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive lower sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Headlamp levelling device inoperative (4.1.5 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sill (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mount (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mount (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))
Power steering component has slight seepage from a component resevoir (2.1.5 (a))
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GP08 EEX is a 2008 Ford Ka in Yellow with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 83.3%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying GP08 EEX, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GP08 EEX?
You can check the full history of GP08 EEX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GP08 EEX registered?
GP08 EEX is a 2008 Ford Ka, first registered on 20 June 2008.
Is GP08 EEX safe to buy?
The MOT history for GP08 EEX shows 18 tests with a 83.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GP08 EEX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GP08 EEX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.