2000 BMW Z3

Emissions not tested (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Brake cable insecure (1.1.15 (c))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Brake cable insecure (1.1.15 (c))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

maf sensor wires disconnected

Offside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material to front (1.1.11 (c))

Central Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Front position lamp(s) missing (1.1.A.3a)

Offside Headlamp insecure (1.7.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Slight pull to the right on brake test.