2002 Toyota Camry

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both front lower arms rear bushes (5.3.4 (a) (i))

Nearside Direction indicator lens defective which has no effect on emitted light Side repeater (4.4.1 (b) (i))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both Pipes to rear flexi hoses. (1.1.11 (c))

Slight corrosion to vehicle underside.

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both front lower arms rear bushes (5.3.4 (a) (i))

Nearside Direction indicator lens defective which has no effect on emitted light Side repeater (4.4.1 (b) (i))

Nearside Direction indicator light intensity significantly reduced Side repeater (4.4.3 (a))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both Pipes to rear flexi hoses. (1.1.11 (c))

Registration plate does not conform to the specified requirements Front and rear plate. (0.1 (d))

Slight corrosion to vehicle underside.

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brakes imbalanced across an axle 48% (1.2.1 (b) (i))

Nearside Rear Outer Brake pipe excessively corroded As marked (1.1.11 (c))

Offside Rear Outer Brake pipe excessively corroded As marked (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Corrosion on all prescribed areas,front/rear sub frames,all suspension and all brake components

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 215/60/16 (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Corrosion on all prescribed areas,front/rear sub frames,suspension and brake components

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Corrosion on all prescribed areas,front/rear sub frames,suspension and brake components

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Corrosion on front/rear subframes,suspension and brake components

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Corrosion on front/rear subframes,suspension and brake components

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit Replacement recommended (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit Replacement recommended (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

condition of rear brake discs