2007 Subaru Impreza

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing 195/60/15 (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

sills covers fitted

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both and worn on edge (5.2.3 (d) (ii))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive upper (5.3.6 (a) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

sill covers fitted

Rear Brake drum back plate insecure both excessively corroded (1.1.14 (d))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both and worn on edge (5.2.3 (d) (ii))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive upper (5.3.6 (a) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

sill covers fitted

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

both rear brake drum backing plates corroded

sill covers fitted

Central Exhaust has a major leak of exhaust gases corroded and insecure (6.1.2 (a))

Emissions unable to be completed exhaust blowing (8.2.1.2 (d))

Offside Rear Shock absorbers damaged to the extent that it does not function badly corroded (5.3.2 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

both rear brake drum backing plates corroded

exhaust back box corroded

sill covers and engine cover fitted

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

exhaust back box corroded

rear brake drum backing plates corroded

sill covers and engine cover fitted

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

exhaust back box corroded

rear brake drum backing plates corroded

sill covers and engine cover fitted

Exhaust back box corroded

Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills and body (5.3.6 (a) (i))

Sill covers fitted

Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (5.3.6 (a) (i))

Sill covers fitted

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

sill covers fitted

Nearside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

sill covers and engine cover fitted

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

sill covers and engine cover fitted

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)