2008 Ford Ka

Front Vehicle structure is corroded but structural rigidity is not significantly reduced ( Under floor area ) (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement ( Forward bush heavily worn & separating. Borderline pass Replacement Recommended ) (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive ( Floor to sill area ) (7.1.1 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated ( There is a small nick in the cover.Borderline pass.Replacement recommended ) (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive ( Floor to sill area & Door shut area ) (7.1.1 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced ( Under floor area ) (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement ( Forward bush heavily worn & separating. Borderline pass Replacement Recommended ) (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive ( Floor to sill area ) (7.1.1 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated ( There is a small nick in the cover.Borderline pass.Replacement recommended ) (5.3.4 (b) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive ( Floor to sill area & Door shut area ) (7.1.1 (a) (i))

Front chassis, underside and sills rusted

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Closing panel by rear axle mount (5.3.6 (a) (i))

Front chassis, underside and sills rusted

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle beam (2.4.A.3)

Slight brake bind offside rear

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Axle beam (2.4.A.3)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle beam (2.4.A.3)

Slight brake bind offside rear

Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Body has slight corrosion (6.1.B.2)

Nearside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Steering locking device missing track rod end split pin (2.2.C.1g)

Offside Steering locking device missing track rod end split pin (2.2.C.1g)

Offside Stop lamp not working (1.2.1b)

Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Body has slight corrosion (6.1.B.2)

Nearside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside rear tyre deteriorated and badly cracked

Nearside Stop lamp not working (1.2.1b)

Nearside rear tyre sidewall starting to crack

Offside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside rear tyre sidewall starting to crack

Offside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

nearside rear tyre deteriorated

Nail in offside front tyre

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside front and rear tyre sidewalls are slightly deteriorated.

Nearside Headlamp not working on dipped beam (1.7.5a)

Service brake: efficiency below requirements (3.7.B.7)

Nail in offside front tyre

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside front and rear tyre sidewalls are slightly deteriorated.

Nearside rear brake noisy.

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)