2008 Volkswagen Caddy

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Brake cable damaged (1.1.15 (a))

Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick Both (1.1.13 (a) (ii)) DANGEROUS

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Service brake excessively binding both (1.2.1 (f))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Both front lower suspension arm rear mounting bushes perished and beginning to split

Centre exhaust pipe leacking

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight dampness around fuel filter - suggest inspection

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

slight dampness around fuel filter - suggest inspection

Spare tyre defective

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt ball joint gaiter (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Shock absorber has a light misting of oil (2.7.3)

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)