2011 Mazda 6

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Inner Reversing lamp lens defective such that emitted light is adversely affected (4.6.1 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Reversing lamp lens defective such that emitted light is adversely affected (4.6.1 (b))

Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear reflector insecure (4.8.1 (b) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Reversing lamp lens defective such that emitted light is adversely affected (4.6.1 (b))

Windscreen damaged but not adversely affecting driver's view chipped (3.2 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Reversing lamp lens defective such that emitted light is adversely affected (4.6.1 (b))

Windscreen damaged but not adversely affecting driver's view chipped (3.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Fuel Pipe/s corroded ()

Nearside Rear Mudguard insecure ()

Nearside Rear Reversing lamp lens damaged

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear rear bumper slightly insecure

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Mudguard insecure ()

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened rear suspension, multiple arms (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement rear suspension, multiple bushes (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

engine cover fitted can not check for leaks

under body trims cover fitted can not check for corrosion

Nearside Rear tyre has a cut in but not showing core

Nearside Rear tyre has cut in but not showing core

engine cover fitted can not check for leaks

under body trims fitted can not check for corrosion

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear tyre has cut in but not showing core

engine cover fitted can not check for leaks

under body trims fitted can not check for corrosion

Nearside Rear wheels has slight buckle in it

Offside Rear wheel has slight buckle in it

windscreen has small stonechip

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear wheels has slight buckle in it

Offside Rear wheel has slight buckle in it

windscreen has small stonechip

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)