2010 Toyota Prius

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Horn not working (7.7 (a))

Nearside Front Drive shaft joint excessively worn (6.1.7 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake load sensing valve linkage defective and function impaired linkage broken (1.1.17 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material ALL UNDER BODY COATED IN A WAX OIL UNABLE TO SEE ANY CORROSION (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake pedal anti-slip provision missing park brake pedal (1.1.2 (c))

Brake pipe corroded, covered in grease or other material ALL UNDER BODY COATED IN A WAX OIL UNABLE TO SEE ANY CORROSION (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated damaged when fitting lower arm (6.1.7 (g) (i))

Nearside Front suspension arm bush not fully pressed in

Offside Front suspension arm bush not fully pressed in

Offside Rear Service brake fluctuating, but not excessively contaminated pads (1.2.1 (e))

Offside parking brake low effort contaminated pads

header tank loose

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

header tank loose

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

all underbody has heavy corrosion

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Fuel hose deteriorated filler neck (6.1.3 (c) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Central Lower Exhaust mounting defective mounting broken off centre pipe (6.1.2 (a))

Front Audible Knock from steering

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Fuel hose corroded filler neck (6.1.3 (c) (ii))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust shield missing where fitted as original equipment creating a risk of fire fuel tank (6.1.3 (e)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Fuel hose corroded filler neck (6.1.3 (c) (ii))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded to rear (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

heat shield loose

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded front to (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)