2011 Chevrolet Aveo

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust has a major leak of exhaust gases Flexy (6.1.2 (a))

Nearside Windscreen washer not working (3.5 (a))

Offside Windscreen washer not working (3.5 (a))

Windscreen in an unacceptable condition (3.2 (c) (i))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases front flexible joint deteriorated (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases front flexible joint deteriorated (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases flexi section (6.1.2 (a))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing also has a cut that could be down to the cords (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases front flexy pipe. (6.1.2 (a))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Service brake lagging in operation not releasing at same rate. (1.2.1 (d))

Exhaust has a minor leak of exhaust gases front flexy pipe. (6.1.2 (a))

Nearside Front brake squeal.

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Brake fluid discoloured.

Exhaust has a minor leak of exhaust gases from front flexi section (6.1.2 (a))

Front wiper blades streaky.

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Brake fluid discoloured.

Exhaust has a minor leak of exhaust gases from front flexi section (6.1.2 (a))

Front wiper blades streaky.

Items removed from driver's view prior to test ()

Nearside front tyre void of tread on outer edge.

Offside front tyre void of tread on outer edge.

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front tyre worn low on outer edge

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front tyre worn low on outer edge

Nearside front tyre perishing

Nearside front wheel trim missing

Offside front road wheel slightly distorted

Play in steering rack inner joint(s)

nearside front tyre is perishing/cracking and starting to wear on the outer edge but at the time of test no ply/cords were showing

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Play in steering rack inner joint(s)

nearside front tyre is perishing/cracking and starting to wear on the outer edge but at the time of test no ply/cords were showing