MOT Status
ExpiredMileage
128,840 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Windscreen washer not working (3.5 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced WHEEL ARCH (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced WHEEL ARCH (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR (6.2.2 (d) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp insecure (4.1.1 (c))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Front Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced WHEEL ARCH (6.1.1 (c) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced WHEEL ARCH (6.1.1 (c) (i))
Offside Front FOG LAMP DAMAGED
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive sump pan corroded (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive sump pan corroded (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER/RADIATOR SUPPORT (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sills both sides (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail both sides (6.1.1 (c) (i))
Sump pan corroded
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Front Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER/RADIATOR SUPPORT (6.1.1 (c) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sills both sides (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail both sides (6.1.1 (c) (i))
Sump pan corroded
Bonnet safety catch defective
Front Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Headlamp aim too high (4.1.2 (a))
Brake pipe slightly corroded both rear inside pipes (3.6.B.2c)
Passenger seat(s) missing at time of test all rear ()
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Brake pipe slightly corroded both rear inside pipes (3.6.B.2c)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Passenger seat(s) missing at time of test all rear ()
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Service brake indicates brake bind (3.7.D.2a)
Offside Rear Anti-roll bar linkage damaged and seriously weakened linkage snapped (2.4.G.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too high (1.8)
Offside Front Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Headlamp aim too high (1.8)
n/s/f tyre worn on outer edge
How Reliable is the Mitsubishi Lancer?
Based on 382,912 MOT tests across 33,260 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GV05 XXW is a 2005 Mitsubishi Lancer in Blue with a 1,584cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2005 Mitsubishi Lancer models, the average MOT pass rate is 75.5% with a typical mileage of 60,560 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Lancer fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 9,095 recorded failures. If you're considering buying GV05 XXW, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Lancer typically stays on UK roads for around 30 years. At 21 years old, this Mitsubishi Lancer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of GV05 XXW?
You can check the full history of GV05 XXW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GV05 XXW registered?
GV05 XXW is a 2005 Mitsubishi Lancer, first registered on 30 June 2005.
Is GV05 XXW safe to buy?
The MOT history for GV05 XXW shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GV05 XXW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GV05 XXW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.